Degradation indicators for power electronic converters
Article Sidebar
Main Article Content
Abstract
Power electronic converters are an important element in the interaction between source and load. In fact, failures in this system often lead to bigger problems. Therefore, it is necessary to monitor the converter components that have the most failures. In this work, we present the estimation of three parameters, which are, in turn, degradation indicators of components in the power electronic converters: equivalent series resistance, capacitance and on-state resistance. Using current and voltage measurements of the Boost converter.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Los autores conservan los derechos de autor y ceden a la revista el derecho de la primera publicación y pueda editarlo, reproducirlo, distribuirlo, exhibirlo y comunicarlo en el país y en el extranjero mediante medios impresos y electrónicos. Asimismo, asumen el compromiso sobre cualquier litigio o reclamación relacionada con derechos de propiedad intelectual, exonerando de responsabilidad a la Editorial Tecnológica de Costa Rica. Además, se establece que los autores pueden realizar otros acuerdos contractuales independientes y adicionales para la distribución no exclusiva de la versión del artículo publicado en esta revista (p. ej., incluirlo en un repositorio institucional o publicarlo en un libro) siempre que indiquen claramente que el trabajo se publicó por primera vez en esta revista.
References
S. Peyghami, F. Blaabjerg, and P. Palensky, “Incorporating Power Electronic Converters Reliability Into Modern Power System Reliability Analysis,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 9, no. 2, pp. 1668–1681, Apr. 2021, doi: 10.1109/JESTPE.2020.2967216.
R. A. Plazas-Rosas, M. L. Orozco-Gutierrez, G. Spagnuolo, É. Franco-Mejía, and G. Petrone, “DC-Link Capacitor Diagnosis in a Single-Phase Grid-Connected PV System,” Energies, vol. 14, no. 20, p. 6754, Oct. 2021, doi: 10.3390/en14206754.
R. Qaedi and H. Samet, “Evaluation of Various Fault Detection Methods in non-Isolated Single Switch DC-DC Converters,” in 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe), Jun. 2018, pp. 1–5. doi: 10.1109/ EEEIC.2018.8494440.
A. Gupta, O. P. Yadav, D. DeVoto, and J. Major, “A Review of Degradation Behavior and Modeling of Capacitors,” in ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, Aug. 2018, no. October. doi: 10.1115/IPACK2018-8262.
G. Susinni, S. A. Rizzo, and F. Iannuzzo, “Two Decades of Condition Monitoring Methods for Power Devices,” Electronics, vol. 10, no. 6, p. 683, Mar. 2021, doi: 10.3390/electronics10060683.
R. A. Plazas-Rosas, E. Franco-Mejía, and M. L. Orozco-Gutiérrez, “Fault diagnosis with states estimation in PV systems,” Revista Tecnología en Marcha, vol. 34, no. 6, pp. 3–9, Nov. 2021, doi: 10.18845/tm.v34i6.5965.
P. Venet, F. Perisse, M. H. El-Husseini, and G. Rojat, “Realization of a smart electrolytic capacitor circuit,” IEEE Industry Applications Magazine, vol. 8, no. 1, pp. 16–20, 2002, doi: 10.1109/2943.974353.
M. A. Vogelsberger, T. Wiesinger, and H. Ertl, “Life-Cycle Monitoring and Voltage-Managing Unit for DC-Link Electrolytic Capacitors in PWM Converters,” IEEE Transactions on Power Electronics, vol. 26, no. 2, pp. 493– 503, Feb. 2011, doi: 10.1109/TPEL.2010.2059713.